Products :
Share This |
Facebook Tweet This MySpcae Google

CorroSorber®
Description: Plastic Cup with breathable membrane 2.3" diameter x 1.27" H (58.4 mm diameter x 32.3 mm H). Corrosorbers absorb hydrogen sulfide and other corrosive gases, while the VpCIs condense on the metal surface. The Corrosorbers will not interfere with the VpCI® protection, but instead will help absorb the gases that cause corrosion.
Package: 10/carton.

Product Data Sheet

Corrosorber.pdf

Safety Data Sheet



Eco Flow™ System
Description: Eco Flow is a two component, single dosing system specifically designed for pipelines carrying water or a mixture of hydrocarbon and water. The Eco Flow system is a combination of chemicals formulated for optimal benefit of prime additives for water treatment, blended in well determined concentrations to obtain maximum performance.

Product Data Sheet

Eco_Flow_System.pdf

Safety Data Sheet



S-5 Wetting Agent
Description: Wetting agent for aqueous and non-aqueous systems. Specially formulated for use in combination with Cortec® water soluble and oil soluble inhibiting systems.
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

S5.pdf

Safety Data Sheet



S-7 Oxygen Scavenger
Description: Oxygen scavenger designed to protect boiler systems against oxygen corrosion (hydrazine-free).
Package: 5 lb. (2.3 kg), 50 lb. (23 kg), 100 lb. (45 kg).

Product Data Sheet

S-7.pdf

Safety Data Sheet



S-10 Corrosion Inhibitor
Description: Corrosion inhibitor for steam condensate lines in boiler systems.
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

S-10.pdf

Safety Data Sheet



S-10 F Boiler Additive
Description: S-10 F is a non-toxic “green” filming corrosion inhibitor for boiler condensate. This inhibitor is effective against corrosion caused by carbon dioxide and oxygen. S-10 F is very useful in facilities where safety concerns limit the concentration of amines allowed in steam lines. The active ingredient of S-10 F is the sodium salt of fatty amino acids.
Package: 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, liquid totes and bulk.

Product Data Sheet

S-10 F.pdf

Safety Data Sheet



S-11 Additive
Description: Additive for acid systems such as industrial cleaning solutions and hot pickling baths
Package: 5 gallons (19 liters), 55 gallons (208 liters)

Product Data Sheet

S-11_and_S-11_Org_and_S-11p.pdf

Safety Data Sheet



S-14 Antiscalant
Description: General purpose water treatment antiscalant. Nonflammable and nontoxic
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

S-14F.pdf
S-14.pdf

Safety Data Sheet



S-14 Bio
Description: S-14 Bio is a unique building block designed for cooling towers and other open-loop, recirculating cooling systems. S-14Bio is a rare combination of a powerful scale inhibition and excellent multi-metal corrosion protection. It is comprised of non-toxic, non-hazardous, and readily biodegradable ingredients. Its main component is a low molecular weight natural polymer, and all the other components are GRAS (Generally Recognized as Safe) substances and food approved preservatives.
Package: 5 gallon (19 liter) containers, 55 gallon (208 liter) metal drums, liquid totes or bulk.

Product Data Sheet

S-14 Bio.pdf

Safety Data Sheet



S-14 RO
Description: S-14 RO is a multifunctional antiscalant for reverse osmosis systems, highly effective in preventing calcium carbonate scale formation on membrane surfaces. Besides its excellent calcium carbonate scale inhibition properties S-14 RO is effectively controlling calcium sulfate, calcium fluoride and metal oxides scale formation. S-14 RO has compatibility approvals from membrane manufacturers.
Package: S-14 RO is available in HDPE 25 kg pails and 250 kg drums.

Product Data Sheet

S-14 RO.pdf

Safety Data Sheet



S-16 Defoamer
Description: Defoamer for aqueous and non-aqueous systems. Specially selected for use in combination with Cortec® water-based and oil-based inhibiting systems. Stable under both acidic and basic conditions. Silicone-based.
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

S16.pdf

Safety Data Sheet



S-49 Fuel Additive
Description: Corrosion inhibiting additive for water and ethylene glycol-based engine heat exchange fluids. Protects ferrous and nonferrous metals.
Package: 5 gallons (19 liters) plastic containers, 55 gallon (208 liters) metal drums, liquid totes and bulk.
Recommended Usage: 2-3%

Product Data Sheet

S49.pdf

Safety Data Sheet



S-69 Liquid Water Treatment Additive
Description:S-69 is an additive package for water treatment formulations. It protects ferrous and non-ferrous metals from corrosive contaminants and is an excellent replacement for phosphonate/nitrite/molybdate-based compounds. S-69 is an organic formulation designed for low level concentrations in field applications.
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

S-69.pdf

Safety Data Sheet



S-69 Powder Water Treatment Additive
Description: S-69 Powders are Vapor phase Corrosion Inhibitors (VpCI®) developed as a corrosion prevention additive for the water treatment industry. This building block provides multimetal protection, including galvanized steel and yellow metals.
Package: S-69 Powders are packaged in 5 lb.(2.27 kg.) boxes and 50 lb (22.7 kg) and 100 lb (45.3 kg) drums.

Product Data Sheet

S-69 powders.pdf

Safety Data Sheet



VmCI-307 Powder
Description: VmCI-307TM Vapor multi-metal Corrosion Inhibitor powder protects both ferrous and non-ferrous metals from corrosion in recessed areas, interior cavities and voids. VmCI-307TM provides an extremely efficient dry method to protect metals within an enclosed space. The VmCI vaporizes and adsorbs on all metal surfaces, reaching all exposed areas, including recessed sections and interior cavities.
Package: 5 pound (2.3 kg), 50 pound (23 kg) and 100 pound (45 kg) lined drums.

Product Data Sheet

307.pdf

Safety Data Sheet


VpCI®-308 Powder
Description: VpCI®-308 is a Vapor Phase Corrosion Inhibitor in powder form for corrosion protection of ferrous and non-ferrous metals in recessed areas, interior cavities and voids. In addition to enhanced multimetal protection and water solubility, VpCI-308 also improves environmental friendliness via increased biodegradable properties.
Package: 5 pound (2.3 kg), 50 pound (23kg) and 100 pound (45 kg) lined drums

Product Data Sheet

308.pdf

Safety Data Sheet


VpCI®-309 Powder
Description: VpCI®-309 is a Vapor phase Corrosion Inhibitor powder for corrosion protection of ferrous metals in recessed areas, interior cavities and voids.
Package: 5 lbs. (2.2 kg), 50 lbs. (3 kg), 100 lbs. (45 kg)

Product Data Sheet

309.pdf

Safety Data Sheet


VpCI®-608 Powder
Description: VpCI®-608 is a Vapor phase Corrosion Inhibitor powder for corrosion protection of ferrous metals in recessed areas, interior cavities and voids, such as double bottom in storage tanks. VpCI®-608 provides an extremely efficient dry or slurry method to protect metals within an enclosed space. The VpCI® vaporizes and adsorbs on all metal surfaces, reaching all exposed areas, including recessed sections and interior cavities.
Package: 100 pound (45 kg) lined drums.

Product Data Sheet

608.pdf

Safety Data Sheet



VpCI®-609 Powder for Ferrous Metals
Description: VpCI®-609 is a water-soluble Vapor phase Corrosion Inhibiting (VpCI®) powder for wet or dry corrosion protection of ferrous metals and aluminum.
Protection: Provides up to 24 months of continuous protection.
Package: 5 lbs. (2.3kg), 50 lbs. (23kg), 100 lbs. (45kg) moisture barrier bags packed in fiber-lined drums.

Product Data Sheet

609.609S.pdf
609_Powder_Russian.pdf

Safety Data Sheet



VpCI®-611 Water-Based Concentrate Inhibitor
Description: Water-based rust preventive concentrate for water blasting or wet abrasive blasting. It leaves a very thin, transparent, tack free film on the metal surface. Weldable and paintable film is non-toxic, pro-environmental and contains no nitrite or phosphate inhibitors.
Package: 5 gallons (19 liters), 55 gallon (208 liters), liquid totes and bulk.

Product Data Sheet

611.pdf

Safety Data Sheet



VpCI®-617 Boiler Water Treatment
Description: Proprietary corrosion inhibitor for boiler water systems. Water soluble, provides long-term protection against corrosion and scale formation. Suitable for low to medium pressure boilers.
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

617.pdf

Safety Data Sheet

USDA-FDA Approvals

USDA approval for 617



VpCI®-629 BIO
Description: VpCI®-629 Bio is the only product on the market of oilfield inhibitors which combines high level of corrosion protection, biodegradability and low toxicity.
Package: VpCI®-629 Bio is packaged in 5 gallon (19 liter) plastic containers, 55 gallon (208 liter) metal drums, liquid totes and bulk. Store product in tightly closed containers. Shelf life is 36 months.

Product Data Sheet

629_BIO.pdf

Safety Data Sheet



VpCI®-629 Inhibitor for Petroleum Producing and Refining
Description: Concentrated additive forms a persistent inhibitive layer to protect the internal surfaces of pipelines, tanks, valves, etc. Used for transportation and storage of hydrocarbons and corrosive fluids. Also available in a super-concentrated version.
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

629SC.pdf

Safety Data Sheet



VpCI®-629 SC
Description: Super-concentrated version of VpCI®-629.
Package: 5 gallons (19 liter) plastic containers, 55 gallon (208 liter) metal drums, liquid totes and bulk.

Product Data Sheet

629SC.pdf

Safety Data Sheet



VpCI®-637 Inhibitor for Gas Flow and Transmission Lines
Description: Provides internal corrosion protection for gas flow and gas transmission lines. Effective against water, corrosive gasses and chloride contamination.
Package: 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.

Product Data Sheet

637 and 637GL.pdf

Safety Data Sheet



VpCI®-639
Description: VpCI®-639 is designed to provide corrosion protection against the severe conditions encountered in petroleum production and refining. Effective for a wide range of refined hydrocarbons, crudes, and oil/water ratios. VpCI®-639 forms an effective, anti-corrosion barrier for metals in the presence of water, halogens and corrosive gases such as dissolved oxygen, sulfur dioxide, carbon dioxide and hydrogen sulfide.
Package: 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.

Product Data Sheet

639.pdf

Safety Data Sheet



VpCI®-641 Liquid Additive
Description: Water-based rust preventative for the protection of ferrous or nonferrous metals in industrial waters.
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

641.pdf

Safety Data Sheet



VpCI®-645 Marine Use Corrosion Inhibitor
Description: A non-toxic, biodegradable concentrate designed to provide long-term effectiveness in fresh water, salt water, brine and other highly corrosive solutions containing dissolved sulfide and halogens.
Package: 5 gallons (19 liter), 55 gallon (208 liter). liquid totes and bulk.

Product Data Sheet

645.pdf

Safety Data Sheet



VpCI®-647 VpCI® based Cooling Tower formulation
Description: Vapor Phase technology based treatment protects cooling and industrial process systems against corrosion, scale and fouling. Environmentally safe.
Package: 5 gallons (19 liter), 55 gallon (208 liter), totes and bulk.

Product Data Sheet

647.pdf

Safety Data Sheet



VpCI®-649 Liquid: Multimetal closed loop treatment
Description: Vapor phase technology based closed loop treatment system that is nitrate, borate, chromate-free and environmentally safe.
Package: 5 gallons (19 liter), 55 gallon (208 liter), totes and bulk.

Product Data Sheet

649.pdf
649 BD.pdf

Safety Data Sheet



VpCI®-649 Powder
Description: Vapor phase technology based closed loop treatment system that is nitrate, borate, chromate-free and environmentally safe.
Package: 5 gallons (19 liter), 55 gallon (208 liter), totes and bulk.

Product Data Sheet

649 Powder.pdf

Safety Data Sheet



VpCI®-658 Undercoating for Insulated Surfaces
Description: A liquid inhibitor for corrosion protection of metal surfaces covered with thermal insulation. Can be injected into insulation already in place to protect metal underneath.
Package: 5 gallons (19 liters),55 gallons (208 liters), totes and bulk.

Product Data Sheet

658.pdf

Safety Data Sheet



VpCI®-705 Bio
Description: VpCI-705 Bio is specially formulated for use as a multifunctional fuel additive to biodiesel and other biofuels. It serves as a corrosion inhibitor, fuel stabilizer, and water emulsifier for biodiesel, diesel, and gasoline. VpCI-705 Bio provides corrosion protection, lubricity and elastomer protection for biobased fuels.
Package: VpCI-705 Bio is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.

Product Data Sheet

705_Bio.pdf

Safety Data Sheet



VpCI®-705 Fuel Additive
Description: Corrosion preventive additive for gasoline, diesel, gasohol mixtures and alcohol fuels that also works as a fuel stabilizer and water emulsifier. Soluble in methanol blends as well as neat methanol fuel or neat gasoline.
Package: 5 gallons (19 liters), 55 gallon (208 liters), totes and bulk.

Product Data Sheet

705.pdf

Safety Data Sheet




ISO 14001 Home ISO 9001
Content
CortecVCI.com Cortec Coated Products Cortec Spray Technologies Cortec Advanced Films Eco Cortec CorteCros Biocortec.com MetalWorking Solutions CorteMCI.com Cortec Packaging Milcorr.com - Asset Preservation System Water Treatment Solutions VpCI for Electronics MetalWorking Solutions VpCI Process Additives Cortec Gear EcoFilm Rawn America Bull-Frog Boris Miksic